With the Flexi series, the name says it all: multifunctional and flexible use as a full-range top or with a subwoofer. On stage with practical 50° and 35° monitor inclination.
As a special feature, all Flexi loudspeakers have an asymmetrical, rotatable horn with a 5° downward inclined dispersion axis. At close range the horn radiates horizontally at 100° particularly wide and at a distance the angle narrows to 50°. The energy distribution on the audience area is more even. The horizontal constriction at 50° concentrates the sound energy at a distance. This focussing and the 5° downward inclination of the radiation axis also improves the transmission quality, because the listener is reached with more direct sound and unwanted diffuse sound caused by room reflections is reduced.
When used as a stage monitor, the performer can still move very close to the Flexi without leaving the beam angle. If he stands further away, the sound does not change.
For flight or tripod operation and mounting in installations, various thread points, swivel brackets as well as wall and mast brackets are available. A Safety-Point allows a Single-Studs with safety rope to be clicked into place for the prescribed secondary protection.
- Plug&Play passively on any suitable amplifier, even without DSP.
- Plug&Play on the TENNAX self-powered Subwoofern (Combi-Sets).
- Plug&Play on Powersoft amplifiers with ready-to-use presets for Armonia Plus software.
- About the TENNAX (AllDSP) 19“ DSP-Controller with any suitable amplifier. Filter values are already set, limiter values can be adjusted by yourself (Limiter preset to 32 dB amp gain).
LF: 1 x 6,5" bass-midrange driver
HF: 1 x 1" Compression driver
68 Hz - 21 kHz (- 10 dB)
100 Hz - 20,5 kHz (+/- 3 dB)
Coverage range (h x v)
asymmetrical 100° to 50° x 55°
Powerhandling (AES / program / peak)
125 W / 250 W / 500 W
Sensitivity 1 W/1 m
91 dB SPL
Sound pressure at (AES / program / peak)
112 dB SPL / 115 dB SPL / 118 dB SPL
2 x Neutrik NL4 IN/OUT 1+/- (4-pole looped-through)
Polyurea coating in RAL 9005
Dimensions / Weight
372 (H) × 190 (W) × 217 mm (D) / 6,6 kg
Carrying bag for 2 x Flexi-6
Item no. 5T0060000
Carrying bag for two Flexi-6 with or without mounted bracket and tripod mount. Strong Codura fabric with padding.
U-bracket for Flexi-6
Item no. 4T0061011
Stable swivel bracket for installation on trusses and ceiling. 2 x M10 hexagon head screws included in delivery.
C-bracket for Flexi-6 horizontal
Item no. 4T0062021
Stable swivel bracket for vertical or horizontal installation on trusses, walls and ceiling. 2 x M10 hexagon head screws included in delivery.
Flat knurled screw M10 x 25 mm
Item no. 999910251
Flat knurled screw M10 x 25 mm, steel black burnished for all u- and c-brackets. As an alternative to the hexagonal bolts supplied with the brackets.
Hand lever M10 x 30 mm
Item no. 600781030
Hand lever M10 x 30 mm, adjustable, flat design, steel black burnished with plastic lever, suitable for all U- and C-brackets.
Item no. 999924521
Tripod transducer with threaded pin M10 x 12 mm and large clamping screw for locking to the tripod. For all common speaker stands with Ø 35 mm.
Item no. 999950731
Loudspeakers can be flown by one person with the self-lock clamp. The clamp hooks directly into the truss and can be easily tightened. Load capacity 250 kg.
Item no. 999981201
With this traverse clamp you can easily and loosely mount your devices to all common traverses with 48-51 mm strap tubes. The clamp impresses with its compact design, its lightness and the maximum tensile load of 100 kg. Locking screw M8 Wing nut and device screw M10.
Eye Bolt M10 x 40 mm
Item no. 999917370
M10 x 40 mm eyebolt, for M10 mounting points. Load capacity 250 kg.
Item no. 999957450
Single stud for securing a loudspeaker with safety cable.
Item no. 999963100
1 m safety cable 6 mm Ø for securing a suspended loudspeaker. One side with a screwable quick connect.
Inclinable Stand Adapter
Item no. 999919780
With this adapter you can attach speakers without built-in flange on stands or wall brackets and adjustable up to 30 ° in the tilt. Max. load capacity: 15 kg.
Tilting and swivelling wall holder
Item no. 999924481
Wall holder with large wall plate for heavy boxes. The mounted box can be swivelled sideways and tilted up to 30 °. Easy installation due to practical mounting and screwing. Max. load capacity: 25 kg.
Wall mount with extension
Item no. 409992031
Wall mount with extension (180° horizontal and 30° vertical adjustment) for parallel positioning. Max. Load capacity: 25 kg.
Wall holder can be swiveled and tilted
Item no. 999924173
Wall holder with tilt and swivel orientation: 145° horizontal, 30° vertical. The inclination can be fixed in 6 steps. The distance to the wall can be selected in 3 steps. With receptacle for high stand flange. Holder is almost completely covered by the speaker. Max. Load capacity: 25 kg.
Wall holder flange big
Item no. 999924120
Stable wall holder with tilt and swivel orientation: 180° horizontal, 22° vertical adjustable in 11 steps. Expanding mandrel for play-free seating in the tripod base of the speaker. Max. load capacity: 50 kg.
Wall- and Trussholder
Item no. 999924150
Wall- and Trussholder with a joint and a tube clamp, circa 520 mm long. Max. load capacity: 50 kg.
Speaker ceiling mount
Item no. 999924496
Robust ceiling mount with 250 mm distance and internal cable management. The swivel area is +/-45 °. Within the parameters - the settings range from 0 to 45°. Max. load capacity: 25 kg.
Item no. 999921368
Telescopic rod with expanding mandrel system for play-free seating in the tripod base. Height: 110 to 180 cm. Max. load capacity: 35 kg.
Distance rod with crank
Item no. 999921340
Distance rod for cranking with expanding mandrel system which provides a tight and firm fit for the speaker. Height: 92 - 152 cm. Max. load capacity: 50 kg.
Speaker stand crank
Item no. 999921300
Stable stand for cranking with double protection against falling. Height: 139 to 218 cm. Max. load capacity: 50 kg.
Item no. 999921467
Stable stand with expanding mandrel system which provides a tight and firm fit for the speaker. Double protection against falling. Height: 132 - 220 cm. Max. load capacity: 50 kg.
Carrying bag for 2 x speaker stand/ rod
Item no. 999920000
Carrying bag for two speaker stands or distance rods, also with crank. Two inside compartments with zipper and sturdy handles. Material waterproof nylon.
Cable Clip for speaker stand/ rod
Item no. 999935000
The cable clip made of robust, durable ABS plastic is specially designed for speaker stands and distance rods with 35 - 36 mm tube. It adheres firmly to the tube and holds the cables securely and neatly in the 24 x 16 mm guide accessible from the outside.
Iron base with weight plate
Item no. 999912311
The set includes a flat 10 kg iron base Ø 45 and a 5 kg weight disc. It is suitable distance rods with an M20 screw thread. The weight disc can be mounted tool-free.
Carrying bag for round base Ø 45 cm
Item no. 999912399
Padded bag made of robust, water-repellent nylon, with space for a round base Ø 45 cm with weight disc. The bag has two carrying straps with a soft velcro handle, a sturdy zipper and a transparent window for labels.
speakON cable 0.5/1/3/6/10/15/20/30 m
Item no. 80440XXX1
Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.
Item no. 999654669
Adapter to connect two speaker cables.
Connection plate with waterproof PG thread cable gland
Item no. 4T0005000
The angled Speakon connector panel can be exchanged e.g. for installation purposes outdoors against a connector plate with waterproof PG thread cable gland.
Connection plate with Phoenix-contact connector strip
Item no. 4T0004000
The angled Speakon connector panel can be exchanged e.g. for installation purposes for a connection plate with Phoenix contact plug connector.
Item no. 997463649
Phoenix Contact 4 pol. as an alternative to the Neutrik NL4 Speakon IN/OUT.